Detailed Product Description

Main features :

Anti-overload and anti-impact strong
High stability: fine than 0.1% full range in every year
Anti-interference ability strong: waterproof, dust-proof, vibration-proof, explosion-proof, corrosion-proof
Wide applicability: the products have many kinds of models and process connection form and material, which is adaptable to various measuring field.
Easy installation: reasonable product structure with small volume and weight light, can be direct installed at any position. 

Technical parameters :

Working voltage       (12.5~36) V DC
Output signal            (4~20) mA DC (analog, two wire system)
Measuring scope    relative pressure: max. 0~60 MPa         min. 0~1.6 KPa
                                    Absolute pressure: max. 0~60 MPa      min. 0~20 KPa
Negative relative pressure           0.1 MPa~1 MPa
Accuracy:                  accuracy grade: 0.1 grade, 0.2 grade, 0.5 grade
                                    Temperature influence: ±0.15%FS/10
                                    Stability: fine than 0.1%FS/year
                                    Position influence: the installation position does not affect zero point
Permission temperature    normal working temperature: -20~70
                                                 Membrane: -20~80 (short-time may reached 130)
                                                 Storage temperature: -20~80
                                                 High-low temperature type: -65~150    10~200      10~350
Explosion-proof grade        isolated explosion type ExdIIBT5 or ExdIICT6
                                                 intrinsic safety type ExibIICT6 or ExiaIICT6
Protection grade      IP67
A part of material contacted with measured medium
              Process connector: 316 L/304/1Gr18Ni9Ti stainless steel /Hutchinson Alloy C
              Seal element: fluorine rubber/Nitrile rubber/PTEE/full sealing weld
Lead-out mode of wiring
may be lead-out from any outlet according to requirement, it is advised to use min.φ7.5 industrial cable as lead so that it is sealed. Lead-out joint selected universal cable joint M20×1.5, without lead end should be sealed with terminal cover.
Adjustment scope       adjustment scope for zero point: ±5%
                                         Adjustment scope for full range: ±20%